Home Industrial Lubricants Vision Lubricants Automotive Ceramic Lubricants Condition Monitoring Biodegradable Oils Optilube

Thames Lubricants Ltd

Production and Research Centre

Garner Street

Stoke on Trent

ST4 7DE, UK

Registered in England No.03516425  VAT No. 704 8864 16


sales@thameslubricants.co.uk

Telephone +44 (0) 1782 745678

T H A M E S


QUARTZ WFM 84 & QUARTZ WFM 00 -20°C to+120°C

Premium quality multi-purpose calcium soap thickened food grade greases for use in all anti-friction and plain bearings found in food processing environments. Provides a high degree of resistance to water and corrosion. Contains white load bearing solids to reduce wear and extend component life.


QUARTZ PLUS 00, 1, 2   50°C to +165°C

Synthetic aluminum complex bearing greases designed to cover a wide range of food safe applications, encompassing extremes of temperature, wet and saturated environments, heavily loaded applications and where there is a presence of dusty ingredients and other contaminants.


QUARTZ GEL   -40°C to +160°C

A silica thickened gel-like translucent grease suitable for plain and rolling element bearings as well as for the lubrication of plastic components and “O” rings. The inclusion of PTFE provides good anti-wear properties.


QUARTZ HIGH TEMP 2   -20°C to +220°C

A high temperature resistant food grade grease containing PTFE and other anti-wear additives. Suitable for all plain and anti-friction bearings as well as sliding surfaces. This grease is also resistant to a wide range of chemical cleaning solutions used in the food and drink industry.


QUARTZ ASSEMBLY PASTE   -30°C to +150°C up to 1100° as an anti-seize

A white, non-toxic grease-like compound with a high level of solid lubricant designed for use during assembly of close tolerance parts and as a service lubricant for bushes, sliding surfaces and small open plastic or metal gears. Prevents damage during start up and protects against premature wear during the running in period. This product can also be used as an anti-seize compound for threaded fasteners.


QUARTZ CHAIN SPRAY  -30°C to +240°C

A food grade, non-drip drive and conveyor chain lubricant in an aerosol. Suitable as a general purpose “oil can” for linkages, pins and where an oil is preferred to lubricate small bearings. Resistant to the wet and the thin film makes this lubricant suitable for environments handling dusty ingredients. Powerful jet spray, extension tube and 360° valve enables spray application with the aerosol at any angle allows easy access to “difficult to reach” areas.


QUARTZ MULTI SPRAY -30°C to +240°C

Fully synthetic food grade grease in an aerosol with characteristics that make it particularly suited for general lubrication where a spray-applied grease type product is required. It encompasses an extremely wide temperature range and is suitable for wet, even saturated conditions.


DIAMOND CHAIN & GEAR OIL -30°C to +240°C

Fully synthetic food grade oil with characteristics that make it particularly suited for the lubrication of drive chains, conveyor chains and gearboxes and reduction units. Available in ISO 150, 220 & 320. Diamond chain & gear oil contains special additives that extend re-lubrication intervals considerably and does not contain any mineral oil.


DIAMOND COMPRESSOR OILS -30°C to +240°C

Compressor oils suitable for all types of compressors designed to operate in applications where ISO 46 and ISO 68 oil viscosities are used. These are food grade, non-toxic synthetic oils developed for all types of compressors used in the food, drink and pharmaceutical industries.


DIAMOND PAO HYDRAULIC OILS  -30°C to +240°C

These hydraulic oils are food grade, non-toxic oils developed for hydraulic systems used in food, drink and pharmaceutical processing and packaging equipment. Also suitable for other hydraulic systems where a clean, non-staining hydraulic oil is desired. Available in ISO 32, 46, 68 and ISO 100.


DIAMOND VHVI AIRLINE FLUID  -30°C to +240°C

A food grade, non-toxic lubricant developed for pneumatic airline systems used on food, drink and pharmaceutical processing and packaging equipment. Also suitable for other compressed air systems where a clean, non-staining product is desired.


DIAMOND VHVI HYDRAULIC OILS  -30°C to +240°C

Food grade, non-toxic oils developed for hydraulic systems used in food, drink and pharmaceutical processing and packaging equipment. Also suitable for other hydraulic systems where a clean, non-staining hydraulic oil is desired. Available in ISO 32, 46 and ISO 68.


DIAMOND MULTI SPRAY  -30°C to +240°C

Fully synthetic food grade oil in an aerosol with characteristics that make it particularly suited for general lubrication of links, pins, pivots, small bearings, drive chains and conveyor chains. In the plastic moulding industry, due to its adhesiveness and temperature stability, this product is ideal for lubrication of ejector pins. Contains special additives that extend re-lubrication intervals considerably and does not contain any mineral oil.

V I S I O N R A N G E
Dedicated lubricants for Food - Drink - Pharmaceutical industries